Before Applying

  • Make sure your natural lashes are clean and dry before applying.

    Tip: Use a gentle cleanser that is free of oils or other residues.

  • Ensure no moisturizer or beauty products are on your natural lashes.

Applying Your Lashes

Bonding

Gently coat or dab your natural lashes with the Duo Bonder. Wait for 30 seconds to allow it to become tacky. Then, using the ULash applicator, carefully place each segment of the ULash kit just under your natural lashes, approximately 1mm away from the lash line.

Tip: Start from the outer corner of your eye and work inward for the most natural look.

Setting

Once all segments are in place, use the ULash applicator to fuse the false lashes and your natural lashes together. Hold the applicator and press gently for 2-3 seconds on each segment.

Sealing

Apply the sealer to the base of the segments to lock them in place and ensure a secure hold. Use the applicator once more to press the lashes together.


Tip: For extra durability, use the sealer sparingly but thoroughly along the lash line.

Maintenance & Removal

  • Maintenance

    If applied correctly, your ULash segments can last up to 2 weeks. To maintain them, avoid oil-based products and clean the lash segments regularly. If any segments begin to loosen or fall out, simply clean the area and reapply following the application steps above.


    Tip: Sleeping with an eye mask helps protect your lashes during rest!

  • Removal

    To safely remove your ULash segments, use the ULash remover along with a microfiber brush. Place the remover onto cotton pads, then gently place the pads on your lashes for at least 60 seconds. Wipe the lashes away carefully—do not tug or pull. If the lashes haven't loosened, repeat the steps until they remove easily.


    Tip: Be patient with the removal process to avoid damaging your natural lashes.

Shop our best sellers...